Nikwax TX Direct Wash In is a wash-in waterproofing for wet weather clothing adds water-repellency and revives breathability to fabrics WITHOUT wicking liners
Washes and adds additional waterproofing to waterproof garments.
NOT to be used on Down feather garments.
Nikwax TX Direct Wash In Features
Adds/ renews water repellency and revives breathability
Prolongs the life of gear and optimises outdoor performance
Easy to apply- can be used in a washing machine, no tumble drying required
Will not affect cosmetic appearance
WaterBased- environmentally friendly, biodegradable, non flammable, non hazardous
Does not contain fluorocarbons
Guaranteed performance for 4 years from manufacture
Ideal for
Clothing with drop liners
Microporous coatings
Gore-Tex
Sympatex
eVENT
Tripple-Point Ceramic
Microfibre fabrics
Breathable laminates
How to apply
For best results remove all non-washable parts and always clean item(s) first with Nikwax® Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing. Shake well before use. Follow care label instructions.
Machine Wash:
Remove all detergent build-up from the detergent dispenser.
Place maximum of 2 clean garments in washing machine.
Use 2 full caps (100ml) per garment.
Run 30o synthetic cycle and slow spin.
Do not machine wash garments if taped seams have become dislodged.*
Hand Wash (use gloves):
Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink.
Add 1 full cap (50ml) of TX.Direct.
Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly.
Rinse with cold water until water runs clear.
Drying: Air dry or tumble dry on a low setting if care label allows. To maintain waterproofing always wash with Nikwax® Tech Wash®. Do not use detergents. *Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.
Be the first to review Nikwax Tx.direct Wash-in. Write a review